; This file installs the SiI 3114 non-RAID serial ATA driver as part
; of text mode setup on Windows 2000, Windows XP, Windows
; Server 2003, and Windows Vista.
;
; Copyright (C) 2003-2008 by Silicon Image, Inc.
; All rights reserved


[Disks]
disk1 = "Silicon Image SiI 3114 SATALink Driver Installation Disk",\si3114.sys,\


[Defaults]
SCSI = Si3114_XP


[SCSI]                  ; HwComponent section
Si3114_XP = "Silicon Image SiI 3114 SATALink Controller for Windows XP/Server 2003"
Si3114_NT = "Silicon Image SiI 3114 SATALink Controller for Windows 2000"


[Files.SCSI.Si3114_XP]
driver = disk1,si3114.sys, Si3114
driver = disk1,SiWinAcc.sys, SiFilter
inf = disk1,SI3114.inf
dll = disk1,SilSupp.dll
catalog = disk1, Si3114.cat


[Files.SCSI.Si3114_NT]
driver = disk1,si3114.sys, Si3114
inf = disk1,SI3114.inf
dll = disk1,SilSupp.dll
catalog = disk1, Si3114.cat


[HardwareIds.SCSI.Si3114_XP]
id = "PCI\VEN_1095&DEV_3114&SUBSYS_31141095", "Si3114"
id = "PCI\VEN_1095&DEV_3114&SUBSYS_B0021458", "Si3114"
id = "PCI\VEN_1095&DEV_3114&SUBSYS_003915D4", "Si3114"
id = "PCI\VEN_1095&DEV_3114&SUBSYS_31148086", "Si3114"
id = "PCI\VEN_1095&DEV_3114&SUBSYS_31141458", "Si3114"


[HardwareIds.SCSI.Si3114_NT]
id = "PCI\VEN_1095&DEV_3114&SUBSYS_31141095", "Si3114"
id = "PCI\VEN_1095&DEV_3114&SUBSYS_B0021458", "Si3114"
id = "PCI\VEN_1095&DEV_3114&SUBSYS_003915D4", "Si3114"
id = "PCI\VEN_1095&DEV_3114&SUBSYS_31148086", "Si3114"


; NOTE:	In order to install Windows 2000 onto a drive that is attached
;	to this controller you must delete the line that reads:
;
;	value = Parameters\PnpInterface, "5", REG_DWORD, 1
;
;	from the [Config.Si3114] section below.

[Config.Si3114]
value = Parameters\PnpInterface, "5", REG_DWORD, 1
value = ProblemDevices, "", REG_SZ, ""
value = ProblemDevices, "Maxtor 4D060H3                          DAK05GK0", REG_SZ, "MaxMode = UDMA-5"
